10” BALL VALVE SEALING ( HARADH 3)A crew from HEBCO were mobilized together with their equipment and by applying all their expertise and our range of sealant products. After a full inspection, the valve is founded to be passing and the gearbox is needed to be adjusted . The valve was sealed and the gearbox was adjusted successfully, thereby allowing the client to change the spectacle blind flange position without the need for a total production shutdown. |
|
10''PLUG VALVE STUCK (AL MUBARRAZ)Our crew was sent with equipped truck to inspect the valve .
After removing the plenty of sand from the valve ,they discovered that the valve is Stuck . Trying to clean the valve indicator from corrosion but did not help so our crew decided to open the gearbox and found it fully corroded and needed to be repaired. Using a special tool that we make in our shop to uninstall the gearbox safely. After doing all needed services to the gearbox , we installed it and the valve has moved but still hard to operate so we cleaned and stroked the valve several time . Successfully , the valve has become operating normally . |
|
10'' BALL VALVE PARTIALLY OPEN AND CLOSE (ABQ GOSP-3)Due to the visual inspection , the valve founded it to be passing. After cleaning the valve and removing the gearbox , our crew noticed the valve is not stuck , it is a partially open and close problem that because of the sludge that appears between the Stem Stop Ring and Fixed Stop.
Importantly, founded the Stem Stop Ring is not in full contact with Fixed Stop which need a special stem puller to make the adjustment safely. Making sure the surface is totally clean before reinstallation the gearbox. After doing all needed services to the gearbox, the valve was operated normally after couple of stroking . |
|
1- Solutions to the problems of leak of butterfly valves in the irrigation and drainage system in the Kingdom.
2- Parts under manufacturing for irrigation and drainage
|
|
|
